Evolution of the World Cup ball as 2026’s Trionda is unveiled

Adidas has unveiled the Trionda, the match ball that will be used in matches at the 2026 FIFA World Cup in Canada, Mexico and the United States next summer. Adidas

The 2026 FIFA World Cup kicks off next summer, and the world has got its first look at the official match ball that will be used at the tournament in Canada, Mexico and the United States.

Adidas has unveiled the Trionda, the 15th consecutive match ball supplied for a FIFA World Cup by the manufacturer in a relationship that dates back more than 50 years.

In all, there have been 23 different ball designs used since the first World Cup took place in Uruguay in 1930, with the Adidas era only beginning with the introduction of the classic Telstar ball at the 1970 World Cup in Mexico.

– Can anyone stop Yamal and Spain marching to World Cup glory?
– Ranking every World Cup mascot: From Ciao to World Cup Willie
– World Cup 2026 host cities: What you need to know about the 16 venues

Since the first World Cup was held in 1930, the changing materials and designs used for soccer balls is a way of charting the evolution of the game itself over the past century, from a more unsophisticated era to the ultramodern professionalism of today.

We take a look at the balls used at every World Cup, from the first one staged in Uruguay almost 100 years ago to the one that will be used when the latest edition kicks off next June.

Editors’ note: This article has been updated since it was first published in 2022.

1930: Uruguay (Tiento and T-Model)

HULTON PICTURE LIBRARY/ALLSPORT

There was no official ball produced for the first World Cup, with a number of different designs used throughout the tournament in Uruguay. Unusually, the final between the hosts and rivals Argentina began with a squabble over which country would provide the match ball, leading to a compromise that saw the first half played with Argentina’s model of choice (the Tiento) before being swapped out for the Uruguayans’ preferred ball (the T-Model) at half-time. Argentina were 2-1 up at the interval before Uruguay scored three goals with their larger, heavier ball in the second half to win 4-2 and take their place as inaugural champions of the world. Make of that what you will.

1934: Italy (Federale 102)

ullstein bild/ullstein bild via Getty Images

Manufactured by ECAS (Ente Centrale Approvvigionamento Sportivi, the Italian government’s central body for sport supplies) in Rome, the Federale was perhaps most notable for being the first World Cup ball to replace thick hardened-leather laces for cotton ones. As well as improving the binding between panels, using softer laces to stitch the ball together made heading the Federale less of a headache, if you’ll excuse the pun. Pictured holding the ball here is former Czechoslovakia captain Frantisek Planicka, who led his nation to the final where they lost 2-1 to the hosts.

1938: France (Allen Coupe du Monde Officiel)

AFP via Getty Images

Produced by the Allen factory in Paris, the Coupe du Monde ball was similar in appearance to the Federale with its 13-panel construction, cotton laces and dark brown cowhide outer shell. However, the edges of the Allen’s individual panels were much more rounded than the 1934 ball which made it rounder and more predictable. It also had to be hand-stitched and hand-inflated by a skilled worker to achieve a spherical finish.

1950: Brazil (Superball Duplo T)

Keystone-France/Gamma-Keystone via Getty Images

Thanks to the technical advances made during the 12-year gap between tournaments due to World War II, the World Cup in 1950 witnessed a minor revolution in the design and manufacture of the official match ball. Gone were the panels and laces of yesteryear and in came the Duplo T, which featured a moulded rubber valve through which the enclosed internal bladder could be inflated by a simple hand pump, much like all modern-day footballs. The concept had already been in use in Argentinian football for many years beforehand but the syringe valve design wasn’t cleared by FIFA for use at World Cups until 1950.

1954: Switzerland (Kost Sport Swiss World Champion)

Christof Koepsel/Bongarts/Getty Images

The Swiss World Champion was the first 18-panel leather ball used at a major football tournament, with a more daring yellow colour and interlocking “W” panels lending the ball a modernised look.

1958: Sweden (Top Star)

dpa/picture alliance via Getty Image

Made by Swedish company Sydlader AB, which was founded in 1914 and initially produced leather drive belts for industrial and agricultural machinery. Sydlader was appointed as official ball suppliers for the ’58 World Cup after the Top Star was chosen in a blind test of over 100 designs by a panel of FIFA officials. Each team was then provided with 30 of the balls for use during the tournament. France forward Just Fontaine clearly liked it: He scored 13 goals in six matches in Sweden, a record for a single tournament which has never been bettered.

1962: Chile (Custodio Zamora Mr Crack)

Peter Pesti/Getty Images

With an 18-panel design inspired by a volleyball, the Crack was a chrome coloured ball that had a smoother, rounder surface (and hence better, more uniform behaviour) than any other World Cup match ball. It was also the last World Cup ball to be provided by a locally tendered company, with Senor Custodio Zamora of San Miguel charged with producing it especially for the tournament. Unfortunately, due to issues with abrasion, brittleness and waterlogging, the Crack was dismissed as inadequate by players and officials alike, leading to a variety of hastily sourced alternatives being used throughout the tournament instead.

1966: England (Slazenger Challenge 4 Star)

CARL DE SOUZA/AFP via Getty Images

After the Crack proved to be anything but, FIFA decided that they would eschew local manufacturers and instead entrust the supply of World Cup match balls to established multinational sports companies. The first such offering was the Slazenger Challenge 4 Star, a 25-panel ball with a latex valve produced in white, bright orange and yellow and selected before the tournament by the English FA in another blind test. The orange variant was chosen for the final as England beat West Germany 4-2 in extra time to lift the Jules Rimet trophy at Wembley. Here, former U.K. Prime Minister Gordon Brown (right) holds the 1966 ball as ex-FIFA president Sepp Blatter marvels at the 1930 version.

1970: Mexico (Adidas Telstar)

Daniel Karmann/picture alliance via Getty Images

The Adidas era began in 1970 with the introduction of the original Telstar, a 32-panel “truncated icosahedron” design that came to define what a typical football would look like for decades to come. Named after a similarly spherical U.S. satellite, a total of 20 Telstars were supplied by Adidas for use at the tournament, meaning they weren’t used in every game, with miscellaneous unmarked brown and white balls used at some matches as well. The distinct two-tone design of the Telstar also made the ball easier to follow for people watching matches at home on black-and-white televisions, though an all-white “Chile Durlast” variation was also used in some games.

1974: West Germany (Adidas Telstar Durlast)

Daniel Karmann/picture alliance via Getty Images

Fundamentally the same design as the original Telstar, the Durlast featured a new, thin polyurethane coating over the leather panels that improved its resistance against waterlogging and abrasion. The tournament was a home triumph both for Adidas and the West Germany team, which lifted the trophy after beating Johan Cruyff’s Netherlands in the final.

1978: Argentina (Adidas Tango)

Manny Millan/Sports Illustrated via Getty Images

One of the most iconic soccer balls of all time, the Tango was introduced for the 1978 World Cup and lasted for many years with only a few minor alternations made to the design. The ’78 Tango consisted of 20 hexagonal handstitched panels coated in a thin plastic “Durlast” membrane to help guard against waterlogging. The graphic design also used triangular markings on each panel to create the illusion of white circles all over the surface, which helped players track the spin of the ball through the air more easily.

1982: Spain (Adidas Tango España)

Alessandro Sabattini/Getty Images

So widely popular was the Tango design that it lasted Adidas from 1978, through the 1982 World Cup in Spain and on to the European Championships and Olympic Games of 1988. The ’82 España edition received only very minor cosmetic updates, though the seams were rubberised to improve its water resistance. The España is also notable for being the last fully leather ball to be used at a World Cup tournament before the dawn of the synthetic era.

1986: Mexico (Adidas Azteca)

ASA/picture alliance via Getty Images

While the Tango was still in use, Adidas decided that a brand new ball was required for the 1986 World Cup and hence the Azteca was created. While resembling the Tango with its hand-sewn 32-panel design, the Azteca was manufactured using 100% synthetic materials and the triangular designs on the panels featured elaborate detailing inspired by Aztec frescoes and culture. It also holds a unique place in football history by being the ball that Argentina’s Diego Maradona punched over the head of England goalkeeper Peter Shilton for his infamous “Hand of God” photo en route to winning the tournament.

1990: Italy (Adidas Etrusco Unico)

Daniel Karmann/picture alliance via Getty Images

Much like the Azteca before it, the Etrusco Unico drew inspiration for its design by the ancient culture of the World Cup host nation. Rather than Aztec art, the 20 triangular triads on the Unico ball were gilded with a depiction of the lions heads regularly found in countless works of Etruscan sculpture, jewellery, fine art and architecture. The Etrusco Unico was also the first World Cup ball to feature an internal layer of black polyurethane foam beneath the outer shell to help provide further protection against waterlogging and to improve the durability and rebound quality.

Peter Robinson/EMPICS via Getty Images

Although its name conjured images of man’s ancient quest to reach the stars and the 25th anniversary of the Apollo 11 moon landing, the Questra was in essence the latest in a succession of Tango clones. Visually very similar to the three World Cup match balls that preceded it, the Questra featured the same pentagonal panel design used on the Azteca and Estruco Unico, though the flourishes in the detailing this time reflected the wonders of space exploration. The Questra was also much lighter than previous World Cup balls, leading attacking players to commend its ability to swerve and curl and goalkeepers to bemoan its unpredictability in the air.

1998: France (Adidas Tricolore)

ANTONIO SCORZA/AFP via Getty Images

Fittingly, the Tricolore was the first multicoloured ball to be used at a World Cup, with the traditional monochrome palette updated to reflect the traditional colours of the host nation: red, white and blue. While the fundamental design of the ball remained unchanged, the cockerel and the flag were selected as the traditional symbols of France to be incorporated into the triad motif. The Tricolore was also the last World Cup match ball to bear the now-iconic “Tango” aesthetic as Adidas began to experiment with new manufacturing techniques and altogether more daring colourways.

Daniel Karmann/picture alliance via Getty Images

The Fevernova saw Adidas break away from the traditional Tango design in favour of a radical offset graphic inspired by Asian culture, which consisted of a three-pronged golden shape (inspired by a Japanese “tomoe” symbol) and red streaks meant to resemble the ancient art of calligraphy. Despite being constructed using 11 different layers, the ball was widely criticised for being far too light and unpredictable, largely as a result of the airy synthetic foam used as padding inside the rubbery polyurethane exterior.

2006: Germany (Adidas Teamgeist and Teamgeist Berlin)

Daniel Karmann/picture alliance via Getty Images

The 2006 World Cup in Germany was the first tournament that saw a second, alternative design of the official match ball produced especially for use during the latter stages of the competition. The standard Teamgeist (meaning “team spirit”) was white with black oval-shaped banding and constructed using just 14 thermally bonded synthetic panels to create a rounder, more precise and almost entirely waterproof ball. A special golden version was produced for the final in Berlin. However, due to having fewer seams, air resistance was reduced to the point that several prominent players complained about the ball’s movement in the air, something which was fast becoming a pre-tournament tradition.

2010: South Africa (Adidas Jabulani and Jo’bulani)

STEPHANE DE SAKUTIN/AFP via Getty Images

Largely remembered as one of the most troublesome World Cup match balls of all time, the Jabulani had a lively name (translating from the Zulu phrase meaning “be happy”) and an even livelier tendency to dip, swerve and balloon away into the terraces. Made from eight moulded panels, the surface of the Jabulani was also textured with thin ridges and grooves in an effort to improve aerodynamics. However, after the opening bouts of the competition were blighted with handling errors several goalkeepers including Gianluigi Buffon and Julio Cesar went public with their concerns over the unpredictability of the ball. As in 2006, a special gold-tinted version of the Jabulani was introduced for the final staged in Johannesburg, hence the name.

2014: Brazil (Adidas Brazuca and Brazuca Rio)

Alexandre Loureiro/Getty Images for adidas

The first World Cup ball to be named by public vote, the Brazuca was made from six bonded polyurethane panels and decked out in a vivid graphic inspired by Bahia bands — traditional Brazilian good luck bracelets made from colourful yarn. With the Jabulani deemed something of a failure, the emphasis was on creating an aerodynamically stable ball that performed consistently in all conditions. Thankfully, the Brazuca was able to avoid the pitfalls of its direct predecessor after undergoing two years of rigorous testing prior to the tournament. Once again, a special version was produced for the grand final in Rio de Janeiro with the green, red and blue flashes of the standard Brazuca replaced by green, gold and black.

2018: Russia (Adidas Telstar 18 and Telstar 18 Mechta)

Joosep Martinson – FIFA/FIFA via Getty Images

Harking back to the glory days of the early 1970s, Adidas updated their classic Telstar design for use in Russia. Rather than using 32 handstitched panels, the modernised Telstar was constructed from just six panels thermally bonded to create a rounder, smoother, more consistent surface. However things got off to an ominous start when two balls burst during a group-stage game between France and Australia. As has become tradition, an alternative design was rolled out for the knockout phase, with the Telstar 18 Mechta (“mechta” being a Russian word for ambition) being unveiled. The only real difference being the red speckles on the shell.

2022: Qatar (Adidas Al Rihla)

Adidas

The Al Rihla (a name that translates from Arabic into English as “the journey”) was a 20-panel design that Adidas said was inspired by the architecture, art and national flag of Qatar. In order to reduce air resistance at what proved to be one of the hottest World Cup finals ever, the ball was made to appear completely seamless and the shape of the thermally bonded panels were directly inspired by the sails of the famous Dhow boats that are emblematic of the Gulf state.

2026: United States, Mexico and Canada(Adidas Trionda)

Adidas

The Trionda features a swirled graphic that mixes red, green and blue — a tricolor designed to represent the national colors of all three of the host countries. The red panels feature the Canadian maple leaf, the blue panels are spangled with stars, and the green swathes have a graphic inspired by the symbolic Aztec eagle.

The detailing is then added in gold, which serves as a visual reference to the World Cup trophy itself. Furthermore, the name is a nod to the 2026 tournament’s triumvirate of North and Central American hosts, with “Tri” obviously meaning “three” and “Onda” meaning “wave” in both Spanish and Portuguese.

The entire ball is made up of just four panels, with debossed lines and embossed country icons to create a surface which, according to the manufacturer, “produces optimal in-flight stability by ensuring there is sufficient and evenly distributed drag as it travels through the air.”

We’ll have to wait until next summer to find out exactly what that means for goalkeepers.

Source link